Next steps
1
Follow the procedure listed in
After working inside your system
.
2
While booting, press F2 to enter System Setup and check that the processor information matches the new system configuration.
3
Run the system diagnostics to verify that the new processor operates correctly.
Power supply unit
NOTE:
For more information, see the
section.
Removing the power supply unit
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure that is listed in
3
Disconnect the power cable from the power supply unit (PSU).
4
Disconnect all the power cables from the PSU to the system board.
Steps
1
Remove the screws securing the PSU to the system.
2
Press the release tab beside the PSU, and slide the PSU toward the front of the system.
3
Lift the PSU out of the system.
Figure 43. Removing the PSU
Next step
1
72
Installing and removing system components
