background image

Getting help

 

Topics:

Contacting Dell

Documentation feedback

Accessing system information by using QRL

Receiving automated support with SupportAssist 

Contacting Dell

Dell provides several online and telephone based support and service options. If you do not have an active internet connection, you can find

 

contact information about your purchase invoice, packing slip, bill, or Dell product catalog. Availability varies by country and product, and 
some services may not be available in your area. To contact Dell for sales, technical assistance, or customer service issues:

Go t

Dell.com/support

.

Select your country from the drop-down menu on the lower right corner of the page.

For customized support:

a Enter your system Service Tag in the 

Enter your Service Tag

 field.

b Click 

Submit

.

The support page that lists the various support categories is displayed.

For general support:

a Select your product category.
b Select your product segment.
c Select your product.

The support page that lists the various support categories is displayed.

For contact details of Dell Global Technical Support:

a Click 

Global Technical Support

.

b The 

Contact Technical Support

 page is displayed with details to call, chat, or e-mail the Dell Global Technical Support team.

Documentation feedback

You can rate the documentation or write your feedback on any of our Dell EMC documentation pages and click 

Send Feedback

 to send 

your feedback.

Accessing system information by using QRL

You can use the Quick Resource Locator (QRL) to get immediate access to the information about your system.

Prerequisites

Ensure that your smartphone or tablet has the QR code scanner installed.
The QRL includes the following information about your system:

How-to videos

Reference materials, including the Owner’s Manual, LCD diagnostics, and mechanical overview

9

Getting help

153

Summary of Contents for PowerEdge R440



























































































































































Reviews: