CAUTION:
If either the system board or iDRAC card fails, it is required to replace both system board and iDRAC card at
the same time.
Step
Hold the blue pull tag and lift the iDRAC card away from the system.
Figure 58. Removing the iDRAC
NOTE:
The iDRAC module is not swappable with other MX series systems in the MX7000 enclosure.
NOTE:
The procedure to remove vFlash card is similar to
.
Figure 59. Removing a vFlash card
Next steps
1
.
2
Follow the procedure listed in
After working inside your sled
86
Installing and removing system components
