Figure 37. Removing the M.2 riser
Next steps
1.
.
Installing the M.2 riser
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3.
Steps
1. Connect the data cable to the M.2 riser.
2. Align the M.2 riser with the stand off on the system board and insert it until the card is firmly seated in the slot.
3. Using a Phillips #2 screwdriver, tighten the screw that secures the riser to the chassis.
Figure 38. Installing the M.2 riser
Next steps
1.
.
Installing and removing system components for PowerEdge C6525
59