Steps
1. Align the screw holes on the left fan (Fan 2) with the screw holes on the system board and palm-rest and keyboard assembly.
2. Replace the two screws (M2x4) and the single screw (M1.6x4) that secure the left fan (Fan 2) to the system board and palm-rest and
keyboard assembly.
3. Connect the left fan (Fan 2) cable to the system board.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Heat sink
Removing the heat sink (for computers shipped with
integrated graphics card)
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
2. Remove the
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
Disassembly and reassembly
33
Summary of Contents for P92F
Page 40: ...40 Disassembly and reassembly ...
Page 42: ...42 Disassembly and reassembly ...
Page 48: ...48 Disassembly and reassembly ...
