5
Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink.
NOTE:
•
Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
•
Do not press on the heat sink fins.
•
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the heat sink
onto the processor and bracket.
Figure 57. Installing the heat sink onto the processor
Next steps
1
Install the
processor and heat sink module
.
2
Install the
3
Follow the procedure listed in
After working inside your system
.
Identifier
GUID-2E2ABFF5-DC4A-4E33-999D-C24199AE51D7
Status
Released
Installing a processor and heat sink module
Prerequisites
CAUTION:
Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1
Follow the safety guidelines listed in
2
If installed, remove the processor/DIMM blank and CPU dust cover.
Installing and removing system components
111
