![Dell EMC Data Domain DD6300 Installation Manual Download Page 33](http://html1.mh-extra.com/html/dell-emc/data-domain-dd6300/data-domain-dd6300_installation-manual_2468348033.webp)
Note
If you type an incorrect password four consecutive times, the system locks out the
specified username for 120 seconds. The login count and lockout period are
configurable and might be different on your system. See the
Data Domain Operating
System Administration Guide
and the
Data Domain Operating System Command
Reference Guide
for setting these values.
Accepting the End User License Agreement
The first time you log in to a Data Domain system, the End User License Agreement
(EULA) is displayed.
At the end of the EULA, you are prompted to accept it:
Press any key then hit enter to acknowledge the receipt of EULA
information
Note
The customer must accept the EULA. A Data Domain representative should not accept
this agreement. If a customer is not present, press
Ctrl-C
to exit from the EULA
acceptance screen and continue the installation.
The customer can later type the following to redisplay the EULA and accept it:
system show eula
Run the configuration wizard
The CLI configuration wizard starts automatically the first time the system starts. The
wizard prompts you through a series of questions that provide just enough information
for initial system configuration and basic network connectivity.
Note
You can begin the CLI configuration wizard manually by typing
config setup
.
Configuring the network
Procedure
1. Enter
yes
to configure the system for network connectivity.
Network Configuration
Configure Network at this time (yes|no) [no]:
yes
2. Enter
yes
to configure DHCP (Dynamic Host Configuration Protocol) to obtain
network parameters (such as, the host name, domain name, and IP addresses)
dynamically from a DHCP server. Or enter
no
to configure the parameters
manually.
Use DHCP
Use DHCP for hostname, domainname, default gateway
and DNS servers? (At least one interface needs to
be configured using DHCP) (yes|no|?)
3. Enter a fully qualified domain name (FQDN) for the host name; for example,
str01.yourcompany.com
. Or accept the host name, if the system was able to
discover it.
Configure System for Use
Accepting the End User License Agreement
33
Summary of Contents for Data Domain DD6300
