Removing the I/O Board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before Working Inside Your Computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Topics:
•
•
Prerequisites
1. Remove the
2. Remove the
.
3. Follow the procedure from step 1 to step 3 in removing the
.
4. Remove the
.
5. Remove the
6. Remove the
.
Procedure
1. Remove the screw that secures the I/O board to the palm-rest assembly.
2. Lift the I/O board off the palm-rest assembly.
a. screw
b. I/O board
23
Removing the I/O Board
37
Summary of Contents for 5000 Series
