Page 6
Delkin Devices User’s Manual
•
Minor malfunctions while using the Reader-19, such as system hangs, can usually
be resolved by simply re-booting the computer. Serious or recurring malfunctions
may require a re-installation of the Reader-19 drivers.
Network Conflicts -
Windows
®
The following procedure may be necessary when installing the e-Film Reader-19 onto a
computer connected to a network. In some cases, the computer may assign the Reader-
19 drive letters that have already been assigned to another drive, such as a network or
peripheral drive. This usually occurs after re-booting the computer with the Reader-19
connected. To avoid this conflict, the Reader-19 can be assigned an available drive
letter after you connect it to the computer but before re-booting. For more information,
contact your network administrator. If your computer is not connected to a network, and
there are no drive letter conflicts, these steps will not be necessary.
Windows ME and 98
1.
Take note of the drive letters assigned to the reader and any network drives. The
Reader-19 will show up as four removable disk icons in
My Computer -
one for each
card slot.
2.
Right click the
My Computer
icon on the desktop.
3.
Select
Properties
from the menu.
4.
Click the
Device Manager
tab.
5.
Click the plus sign (+) next to
Disk Drives
.
6.
The card slots will be listed as
OEI-USB CompactFlash, OEI-USB SmartMedia, OEI-
USB MMC/SD
and
OEI-USB Memory Stick
. Double click one of them to bring up a
properties window.
7.
Click the
Settings
tab.
8.
In the section labeled
Reserved drive letters
; use the arrow to select and assign a
Start drive letter
(the
End drive letter
will change as well). Select a letter that does
not conflict with any other drives. This is best accomplished by selecting a letter
that is farther down the alphabet than any of your network drives. You will need to
re-boot for the changes to take effect.
9.
Repeat the procedure for the other card slots.
Windows XP and 2000
The drive letters assigned to the Reader-19 can be manually assigned through
Disk
Management
, located under
Administrative Tools
. You must be logged on as System
Administrator before you can make these changes.
USB CF / SM / SD / MMC / MS Reader/Writer
DDREADER-19
