40
User Name
The account provided by your ISP
Password
The password for your account.
Connect Type
“C ontinuo us “: connect to ISP permanently
“Manual”: Manually connect/disconnect to ISP
“On-Demand”: Automatically connect to ISP when the user needs to
access the Internet.
Idle Time
The number of minutes of inactivity before disconnecting from ISP. This
setting is only available when
“Connect on Demand” connection type is
selected.
MTU Size
Maximum Transmission Unit, 1412 is the default setting, you may need to
change the MTU for optimal performance with your specific ISP.
DNS 1~3
The IP addresses of DNS provided by your ISP.
DNS (
Domain Name
Server) is used to map domain names to IP addresses. The DNS
maintains central lists of domain name/IP addresses and maps the
domain names in your Internet requests to other servers on the Internet
until the specified web site is found.
Clone MAC
Address
Clone device MAC address to the specific MAC address required by your
ISP.
Enable uPnP
Enable uPnP, this function allows the device to be found and configured
automatically by the system. (Ex. Window XP)
PPTP
Point to Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only
Summary of Contents for DLB27 Series
