Delfino DRH7, User Manual

Page: 13 / 16

Protocol
9
Electrode calibration (assuming the electrode address is 1)
Zero calibration:
The calibration value is the value set by the zero calibration point, the default is 86
Use function code 16 to write value 86 to register address 206 to perform calibration
Host send
[01 10 00 CE 00 02 04 00 00 42 AC 4E AE]
Slope calibration:
The calibration value is the value set by the slope point, the default is 256
Use function code 16 to write value 256 to register address 200 to perform calibration
Host send
[01 10 00 C8 00 02 04 00 00 43 80 CE C9]
Factory reset (communication parameters are not restored) (assuming the electrode address is 1)
Use function code 06 to write the value 99 to the register address 400 to perform recovery
Host sends
[01 06 01 90 00 63 C8 32]
4.3.3 Electrode Calibration
4.3.4 Factory reset