1.5 Intended uses
These specific vacuum cleaner models have been designed, built and protected for
vacuuming dusts and solid materials only, using special filters.
Important!__________________________________
Always use specific filters for the type of dust or materials to be vacuumed.
Any other use is considered
The vacuum cleaner is in any case intended for professional industrial use.
1.6 Allowed environmental cond
To ensure the correct operation of the vacuum cleaner, this must be positioned protected
against atmospheric agents (rain, hail, snow, fog, dusts in suspension, etc.) with an
environmental running temperature between 5°C and 4 5°C and relative humi
70%.
The work environment must be clean, well
1.7 Noise level
Noise level readings were taken in accordance with the provisions of
2006/42/CE standards.
Sound tests performed on this specific vacuum cleaner model have been taken from a
distance of 1 meter and from a height of 1,60 meters, showing an acoustic pressure no
higher than:
The vibrations transmitted by the machine are lower than 2,5 m
Important!
Pursuant to articles L.D. 81/08, workers exposed to sound pressure levels above 85
dB(A) must be protected by special individual protection devices.
It is therefore necessary, i
such approved individual protection devices and to inform them of the risks relating
to noise exposure.
1.8 Storage
Remove the filter and clean it, empty the container and store the vacuu
protected against atmospheric agents with a temperature between 0°C and 40°C. Cover
with a nylon sheet to prevent accumulation of dust.
1.9 Scrapping
In case of scrapping, all the component parts of the vacuum cleaner will have to
disposed of through adequate disposal channels in accordance with applicable legislation.
Before scrapping, all plastic and rubber parts will have to be separated from the electrical
material. Parts made of plastic, aluminium and steel only may be recyc
special centres.
Information Section
DM35 SGA – DM40 SGA – DM3
9
These specific vacuum cleaner models have been designed, built and protected for
vacuuming dusts and solid materials only, using special filters.
_______________________________________________________________
Always use specific filters for the type of dust or materials to be vacuumed.
Any other use is considered IMPROPER.
The vacuum cleaner is in any case intended for professional industrial use.
1.6 Allowed environmental conditions
To ensure the correct operation of the vacuum cleaner, this must be positioned protected
against atmospheric agents (rain, hail, snow, fog, dusts in suspension, etc.) with an
environmental running temperature between 5°C and 4 5°C and relative humi
The work environment must be clean, well-enough lit and devoid of explosive atmosphere.
Noise level readings were taken in accordance with the provisions of
rmed on this specific vacuum cleaner model have been taken from a
distance of 1 meter and from a height of 1,60 meters, showing an acoustic pressure no
76 dB (A)
The vibrations transmitted by the machine are lower than 2,5 m
2
/s.
Pursuant to articles L.D. 81/08, workers exposed to sound pressure levels above 85
must be protected by special individual protection devices.
It is therefore necessary, if such working conditions exist, to provide workers with
such approved individual protection devices and to inform them of the risks relating
Remove the filter and clean it, empty the container and store the vacuu
protected against atmospheric agents with a temperature between 0°C and 40°C. Cover
with a nylon sheet to prevent accumulation of dust.
In case of scrapping, all the component parts of the vacuum cleaner will have to
disposed of through adequate disposal channels in accordance with applicable legislation.
Before scrapping, all plastic and rubber parts will have to be separated from the electrical
material. Parts made of plastic, aluminium and steel only may be recyc
Information Section
These specific vacuum cleaner models have been designed, built and protected for
_____________________________
Always use specific filters for the type of dust or materials to be vacuumed.
The vacuum cleaner is in any case intended for professional industrial use.
To ensure the correct operation of the vacuum cleaner, this must be positioned protected
against atmospheric agents (rain, hail, snow, fog, dusts in suspension, etc.) with an
environmental running temperature between 5°C and 4 5°C and relative humi dity not above
enough lit and devoid of explosive atmosphere.
Noise level readings were taken in accordance with the provisions of Machine Directive
rmed on this specific vacuum cleaner model have been taken from a
distance of 1 meter and from a height of 1,60 meters, showing an acoustic pressure no
Pursuant to articles L.D. 81/08, workers exposed to sound pressure levels above 85
must be protected by special individual protection devices.
f such working conditions exist, to provide workers with
such approved individual protection devices and to inform them of the risks relating
__
Remove the filter and clean it, empty the container and store the vacuum cleaner in a place
protected against atmospheric agents with a temperature between 0°C and 40°C. Cover
In case of scrapping, all the component parts of the vacuum cleaner will have to be
disposed of through adequate disposal channels in accordance with applicable legislation.
Before scrapping, all plastic and rubber parts will have to be separated from the electrical
material. Parts made of plastic, aluminium and steel only may be recycled if collected by