background image

Project  __________________________________

Item  ____________________________________

Quantity   ________________________________

CSI Section 11400

Approved   _______________________________

Date  ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Shelleymatic

®

by Delfield

Specifications

Standard Features

Options & 
Accessories

Cabinet  top  and  corners  to  be  16-gauge 
stainless steel
1” IPS drain
Units  insulated  with  foamed  in  place 
environmentally  friendly,  Kyoto  Protocol 
Compliant,  Non  ODP  (Ozone  Depletion 
Potential),  Non  GWP  (Global  Warming 
Potential) polyurethane
Units to have sliding stainless steel lids with 
recessed handle
Self-leveling  mechanisms  shall  be 
adjustable  by  adding  and  removing 
stainless  steel  extension  springs  located 
inside the elevator housing
Dispenser  platform  carrier  shall    be  18-
gauge  stainless  steel  and  removable  for 
cleaning
6” adjustable stainless steel legs
Refrigeration  system  shall  be  HFC-134A 
refrigerant
Expansion valve and pressure control
9’ cord and plug
One  year  parts  and  90  day  labor  standard 
warranty





N6-1313-34 

6 crate capacity, 34” height

N6-1313-36 

6 crate capacity, 36” height

N10-1313-34 

10 crate capacity, 34” height



N10-1313-36 

10 crate capacity, 36” height

N14-1313-34 

14 crate capacity, 34” height

N14-1313-36 

14 crate capacity, 36” height



Models

N6/N10/N14

Free-Standing Self-Contained Milk Or Beverage Dispensers

N

6/

N

10

/N

14

 Fr

ee

-S

ta

nd

in

g S

elf

-C

on

ta

in

ed

 M

ilk

 O

r B

ev

era

ge

 D

isp

en

se

rs

4.00”  (10.2cm)  diameter  swivel 
casters  (two  locking)  with  corner 
bumpers  (adds  1.75”  [4.4cm] 
to  overall  length  and  depth  and 
reduces  overall  height  by  1.00” 
[2.5cm])
Wrap-around  bumpers  (adds  1.75” 
[4.4cm]  to  overall  length  and 
depth)
Lid locking device
Special voltages
Dial or digital style thermometer



N10-1313-36

Exterior

 sides shall be 20-gauge stainless steel. Top and corner 

supports shall be 16-gauge stainless steel, welded, ground and 
polished into one integral unit.

Interior

 liner shall be water-tight and constructed of 22-gauge 

stainless  steel  with  a  1.00”  (2.54cm)  I.P.S.  drain.  Unit  shall  be 
insulated with high-density, foamed-in-place environmentally 
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion 
Potential), Non GWP (Global Warming Potential) polyurethane 
insulation with a non-conductive top breaker strip. Refrigerated 
compartment is equipped with drain plumbed to a drain valve 
located at the bottom of the counter. Each opening shall have 
a  stainless  steel  sliding  lid  recessed  handles.  Three  stainless 
steel  louvers  shall  be  installed  in  the  end  and  sides  of  the 
cabinet to allow proper air flow to the condensing unit.

Each  self-leveling  mechanism  shall  be  field  adjustable  by 
adding  or  removing  stainless  steel  extension  springs  in  the 
elevator  housing  inside  the  unit.  The  elevators  shall  be 
connected  by  removable  platform  carriers  constructed  of  18-

gauge stainless steel.

Refrigeration  system

  shall  use  HFC-134a  refrigerant. 

Refrigerant  flow  shall  be  controlled  by  an  expansion  valve. 
Cabinet  shall  maintain  36°F  to  40°F  (2°C  to  4°C)  temperature 
with  lids  closed  for  storage.  Refrigeration  system  shall  be 
controlled by a pressure control, located near the condensing 
unit.

Electrical

 connections shall be 115 volt, 60 cycle, single phase. 

Unit shall have a 9’ (2.7m) long electrical cord and NEMA 5-15P 
plug.  Exterior has an ON/OFF switch.

Legs:

 Unit shall be mounted on 6.00” (15.2cm) high adjustable 

stainless steel legs.

NOTE: This  equipment  is  intended  for  storage  and  /or  display 
of pre-packaged or bottled products only.

Reviews: