5
Bar Code Programming Menu
The DelfiScan bar code commands are specially designed
Proprietary
bar code labels which allow you to set the
DelfiScan internal programming parameters. There are
System Command
,
Family Code
and
Option Code
for
programming purpose.
Each programmable family and bar code command label is listed on the same page with major system commands. The
detailed explanations and special programming flowchart are printed on facing or following pages. You can read the
explanation and set the DelfiScan concurrently.
A supplemental bar code command menu incorporates the bar code command labels of System Command and Option
Code. As you set the DelfiScan, open the bar code command menu to find the option code page. You may scan the
desired family code and option code to set DelfiScan. If you want to change the programming family for multiple
settings, you need only turn over the programming page to find next desired programming family.
System Command
The System Command is the highest level bar code command which directs DelfiScan to perform immediate operations,
such as entering programming mode (
PROGRAM
), exiting programming mode (
EXIT
), listing system information
(
SYSLIST
), recovering to factory preset configurations (
M_DEFAULT
), and so on. Please note that all system commands
will take a few seconds to complete the operations. User must wait for the completion beeps before scanning another
bar code.
Family Code
The Family Code is scanned to select the user desired programming family. DelfiScan has already provided more than
one hundred programming families to meet any specific requirements.
Option Code
The Option Codes is a set of bar code commands represented by “
0–9
”, “
A–F
” and finishing selection (
FIN
). For most
setting, you must select at least one option code following the family code selection to set the desired parameter for the
selected programming family.