After Sales Care Support:
For the UK market only:
Tel. 01491 821 821 -
email:
The installation guide is available on: www.delabie.co.uk
For all other markets:
Tel. +33 (0)3 22 60 22 74 -
email:
The installation guide is available on: www.delabie.com
REMEMBER
•
Our valves must be installed by professional installers
in accordance with current regulations
and recommendations in your country, and the specifications of the fluid engineer.
•
Sizing the pipes correctly
will avoid problems of flow rate, pressure loss and water hammer
(see calculation table in our brochure and online at www.delabie.com).
•
Protect the installation
with filters, water hammer absorbers and pressure reducers to reduce the frequency
of maintenance (recommended pressure from 1 to 5 bar maximum).
•
Install stopcocks
close to the valve to facilitate maintenance.
• The pipework, filters, non-return valves, stopcocks, bib taps, cartridge and all sanitary fittings should be checked
at least once a year, and more frequently if necessary.
MAINTENANCE & CLEANING
•
Cleaning chrome and stainless steel:
do not use abrasive, chlorine or any other acid-based cleaning products.
Clean with mild soapy water using a cloth or a sponge.
•
Frost protection:
drain the pipes and operate the mixer/tap/valve several times to drain any remaining water.
In the event of prolonged exposure to frost, we recommend taking the mechanisms apart and storing them indoors.
OPERATION - ELECTRICAL VERSIONS
• Mains versions (ref. 428150 & 428200):
Factory setting: "
PROG 1
":
PROG
(
Fig. K
)
Presence detection
(
Fig. L
)
Time to recognise
user presence
Pre-rinsing
Rinse timing
(
Fig. M
)
Duty flush
1
15 - 50cm
3 sec.
2 sec.
3 - 12 sec.
Every 24 hours *
2
15 - 50cm
3 sec.
-
3 - 12 sec.
Every 24 hours *
3
15 - 50cm
-
-
During user’s
presence
-
• Battery-operated versions (ref. 428156 & 428206):
PROG
(
Fig. K
)
Presence detection
(
Fig. L
)
Detection
delay
Rinse timing
(
Fig. M
)
Duty flush
(
Fig. I
)
3
15 - 50cm
5 sec.
3 - 12 sec.
OFF - 12h -24h *
* after last use
14
Summary of Contents for TEMPOMATIC 428150
