background image

 

                                                                                                              

 2 

 

PREFACE 

 

This manual is an integral part of the machine. 

It must always accompany the machine and be kept within reach of the operator. 
The enclosures mentioned are on integral part of this manual. 

The purpose of this manual. 

This manual gives information for the correct and safe use of the machine. 
The owner must read this manual carefully before work with the machine. 

Responsibility of the owner 

The owner is responsible for accidents or damages caused to people or things due to negligence in following 
the instructions in this manual. 

Assistance in using this manual 

Explanations: contact the dealer. 
Request for additional copies of the manual: in case of loss or wear and tear, or in case one wants the 
manual in a different language, the customer should ask the dealer or manufacturer. 

Pay attention to the warning signals 

<

Danger

>: indicates a situation that is potentially dangerous which, if not avoided, will cause death or 

serious  

 damage. 

<

Warning

>: indicates a situation that is potentially dangerous which, if not avoided, will cause death 

or  

    serious damage. 

<

Caution

>: indicates a situation that is potentially dangerous which, if not avoided, can cause minor to  
  moderate damage, or it indicates to be careful about an unsafe procedure. 

<

Important

> : indicates instructions that must be followed precisely in order to avoid damage to the product, 

process  

         or environment. 

<

Note

>: indicates supplementary information. 

 

Summary of Contents for Funny





















Reviews: