Product-Notes
Manual
Article No.: 843019
Deko-Light Elektronik-Vertriebs GmbH
12.04.2018
www.deko-light.com / [email protected]
Technical Data can be changed without advance notice. Errors excepted.
1 / 7
Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and
national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual! They contain important information for the start-up and handling. It is
important, therefore, that these documents are archived carefully for referring to information at a later stage.
aufbewahren.
1. Safety Instructions
We are not responsible for any property damage or personal injury caused by failure to observe these
productnotes and manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician.
Make sure that the item has not been damaged during transport before putting the light into operation. It
maynot be operated if there are any damages to electrical parts.
It may only be operated once removed from the packaging.
The type plate must not be removed.
The connection lines in the building must be disconnected before installation and secured against
beingswitched back on. For this, trip the corresponding fuse switch in the building installation.
Make sure the electrical specifications for the connection lines correspond with the specifications given on
thenameplate of this product.
We recommend that you protect the product with a residual-current-operated protective device. Follow all
installation regulations applicable at your location.
Make sure that the cables and plugs are not subject to tension or torsional forces and do not bend the cables.
Protect all cables and insulation against possible damages.
Output lines should be laid separately and spaced apart from other lines. The power supply cables and
thelamp feeders must not cross each other.
Do not allow the product to come into contact with extreme heat or naked flames.
Use the supplied fastening material only when it is suited for the installation background.
The product must not be covered with objects (decorations) or thermally insulating coverings /similar materials.
Before disposal of the packaging material make sure that all components are removed.
Keep packaging material away from the reach of children and pets. The packaging contains small parts
thatmay be swallowed by children.
