Deklin Technologies AIU-900A Installation Manual Download Page 8

 Section IV – Warranty and Service 

 

WARRANTY 

Deklin Technologies, Inc. warrants this product to be free from defect in workmanship and material for a 
period of 24 months from the time of installation or 26 months from the factory shipping date. This 
warranty is valid only if the equipment is installed in an aircraft by a FAA certified avionics facility (or 
other ICAO agency). 
 
If during the warranty period this unit should fail it will be at the discretion of Deklin Technologies, Inc to 
send a replacement unit or repair the original unit. All units must be returned to the factory for repair or 
replacement. 
 
All shipping and handling charges for the return of a unit to the factory are the responsibility of the 
purchaser. Domestic UPS Ground shipping charges for sending an exchange or repaired unit to the 
customer will be the responsibility of Deklin Technologies, Inc. Any additional charges as a result of 
requested improved delivery time, alternate carrier, insurance, or handling costs are the responsibility of 
the customer. All freight, handling, insurance, brokerage fees, duties and taxes for shipments outside the 
continental United States is the responsibility of the customer. 
 
Deklin Technologies, Inc shall not be liable for incidental or consequential damages. This warranty does 
not cover a defect that has resulted from improper handling, storage or preservation, unreasonable use, or 
maintenance. This warranty is void if there is any attempt to dissemble this product without factory 
authorization. This warranty does not cover expenses incurred for the removal and/or installation of this 
product.  
 
All items repaired or replaced under this warranty are warranted for the remainder of the original 
warranty period. Deklin Technologies, Inc reserves the rights to make modifications or improvements to 
the product without obligation to perform like modifications or improvements to previously manufactured 
products.  
 

FACTORY SERVICE 

In the event any unit needs to be returned to the factory, contact Deklin Technologies, Inc for a Return 
Authorization Number prior to returning. 
 
Units that arrive without a Return Authorization Number, or telephone number, will be returned un-
repaired. Deklin Technologies, Inc is not responsible for items returned via Mail. 
 

 

Deklin Technologies, Inc. 

2011 

Summary of Contents for AIU-900A





















Reviews: