Deklin Technologies AIU-900A, Installation Manual

Page: 7 / 20

Noise
Due to the variety and high power of equipment in today’s aircraft, there is a potential for both electrical
and conducted noise interference. To minimize the occurrence of noise being introduced into the system,
please follow these installation guidelines.
Do not bundle any lines from this unit with transmitter coax lines.
Do not bundle any lines from this unit with any other audio or high voltage power lines.
Do not bundle any lines from this unit with 400 Hz synchro wiring or AC power lines such as
strobes or inverters.
Do not position this unit or route wiring from this unit next to any device with a strong alternating
magnetic field such as an inverter.
Use shielded wire where shown and ground as indicated.
Post Installation Check
After installation wiring is complete, verify no power is on any pin and airframe ground on pin 5 only.
Operational Checkout
Follow instructions in specific OEM PFD Installation Manuals for check out procedures.

Deklin Technologies, Inc.
2011
3