2
REMOTE INSTALLATION INSTRUCTIONS:
The remote handset has been paired with the receiver at the factory. Multiple remotes can be installed
in one location without any interference.
Plug the quick connect plug sockets together and ensure a male / female match. (Fig. 1)
Slide receiver into ceiling canopy, ensuring exposed antenna (Fig.2)
Slide ceiling canopy up to ensure safe enclosure of all connections. (Fig.3)
IMPORTANT INFORMATION:
There are two common methods for controlling fan operation: (a) control by wall switch (b) control
by remote controller.
(a) Wall controller. A remote control
cannot
be added unless the wall controller
is removed
and
replaced with a single pole switch in its place as per local wiring instructions AS3000.
(b) Using a remote control kit to control the fan operation: Before using remote controller,
remove any wall control switch
and replace with a single pole switch.
Fig. 1
Fig. 2
Fig. 3
Remote control instructions_Nov20.qxp_Layout 1 20/11/20 9:07 am Page 2
