8
EN
SPECIFIC FUNCTIONS
Convenient, the last used temperature is automatically memorised.
To see it before starting the heat up, just press one of the selection buttons ( ) or ( )
You can also directly select the comfort temperatures 60°C, 80°C and 100°C
1. Follow instructions 1 to 5 of the paragraph “Use”.
2. For a direct access to the setting:
- 60°C: continuously press the selection button ( ) for minimum 2 seconds. A sound signal will
be heard confirming the setting of the temperature. Then press the “ON/OFF” button to start
the heating cycle.
- 80 °C: simultaneously press both selection buttons ( ) and ( ) during minimum 2 seconds.
A sound signal will be heard confirming the setting of the temperature. Then press the “ON/
OFF” button to start the heating cycle.
- 100 °C: continuously press the selection button ( ) during 2 seconds. A sound signal will be
heard confirming the setting of the temperature. Then press the “ON/OFF” button to start the
heating cycle.
3. When the temperature is reached a sound signal will be heard. The function “Keep Warm”
automatically activates for 30 minutes.
Once the water has reached the selected temperature, the function “Keep Warm” automatically
activates for 30 minutes.
This keep warm phase is symbolised by a scrolling of luminous dots on the display.
The button “ON/OFF” (5) keeps switched on and the selected temperature is displayed.
KEEP WARM
NOTE
- The temperature of the Keep Warm function is the selected temperature if it is
between 50°C and 90°C.
- If the selected temperature is 95° of 100°C, the Keep Warm starts when the
temperature gets to 90°C. At any time, it is possible to check the selected
temperature: shortly press one of the selection buttons ( ) or ( ) the selected
temperature flashes on the display (3) for a few seconds, and then it will show the
real temperature of the water.
- If the kettle is removed from its base (7) during the Keep Warm phase, the kettle
will automatically stop.
