WSI, WSDI, WSS or WSS-L
User’s Manual
DEIF A/S
Page 5 of 19
2. Warnings and general information
Do not expose the plastic part of the wind sensor to any torque when
mounting the sensor; the tools used for fastening are only to be applied on
the actual tap.
For cleaning of the wind sensor, if necessary, only use water with a little dish
washer soap.
Avoid paint on the plastic parts of the wind sensor, especially on the 3
ultrasonic sensors, as paint will prevent correct function (measurement of
wind speed and wind direction).
Make sure that the WSS wind sensor is grounded according to the installation
instructions.
If there is a high risk of birds landing on top of the WSS and thereby
interrupting wind measurements or even damaging the sensor heads (the
black rubber heads may attract some birds), it is highly recommended to use
the “WSS bird avoidance kit”!