MTR-3
Installation Instructions
DEIF A/S
Page 6 of 51
3. Basic description and operation of the MTR-3
Introduction
What is in the delivery?
The consignment includes:
•
Multi transducer MTR-3
•
Label for I/O functionality description
•
Quick Start Guide
Description of symbols
In different chapters or tables, different symbols may appear in the installation instructions.
According to the position of symbols, they have different meanings.
Double insulation in compliance with the SIST EN 61010-1 standard.
Functional ground potential.
Note: this symbol is also used for marking a terminal for protective ground
potential if it is used as a part of connection terminal or auxiliary supply
terminals.
Compliance of the product with directive 2002/96/EC, as first priority, the
prevention of waste electrical and electronic equipment (WEEE), and in
addition, the reuse, recycling and other forms of recovery of such wastes so as
to reduce the disposal of waste. It also seeks to improve the environmental
performance of all operators involved in the life cycle of electrical and electronic
equipment.
Compliance of the product with European CE directives.
Subchapter
Symbols next to the subchapters indicate accessibility of functions described.
Accessibility of functions is indicated with the following symbols:
Function accessible via communication (M-Set software)
Tables
Supported functions and measurements are listed in tables. Symbols in tables
indicate support of enabled functions. Additionally, a legend is placed the below
table of used symbols. The meaning of symbols is:
●
Function is supported
×
Function is not supported
○
Symbol meaning varies and is described in the legend below the table