●
Reading information using the batch read function (
) (described below): this reads all the information
from the controller, then writes it to a .usw file on the PC.
●
Backing up the controller: this writes the controller information to a .bak file on the PC.
Batch read function
The controller logs, input and output configuration, and parameter settings can be read and saved in a file on
the PC. To use the batch read function:
1. Click the batch read and write icon (
) on the toolbar and select
Read from device.
2. The Batch job (Reading) dialogue box opens. Select the information that you would like to read using the
check boxes and click
Run
.
3. A window opens. Browse to the location where you would like to save the file, type in the name, and click
Save
4. The parameters and input and output configuration may be changed, and written to the CGC 200. Alter-
natively, the parameters can be saved to a file on the PC. See
Writing to the controller
for more infor-
mation.
5.3.4 Writing to the controller
You can write to the controller by:
CGC 200 Operator's manual 4189340770
UK
Using the Utility Software
DEIF A/S
Page 38 of 43
