DEI 500 ESP, Owner'S Manual

Page: 26 / 40

22
©
1999 Directed Electronics, Inc.
■
Full trigger response 30 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the DEI Bitwriter or a personal computer
and the TechSoft Programmer, the full triggered response can
be programmed for any duration ranging from 1 to 180
seconds.
■
Nuisance Prevention ® Circuitry on or off: Please refer to the
NPC ™ section of this manual for a complete explanation of
how NPC ™ operates. If NPC is programmed off, the security
system will respond to inputs from any sensor indefinitely.
NOTE: Because many states have laws regulating security systems, pro-
gramming NPC off may cause your system to violate state laws.
■
Progressive door trigger on or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
■
Valet pulse count: The number of presses of the Valet ® switch
required to disarm the security system or the VRS ® system can be
programmed from 1-5 presses. The default setting is one press.
■
Siren tones and chirp volume: The output of the Revenger ®
Soft Chirp ® siren consists of six different tones in sequence.
Any of these tones can be eliminated by your dealer, result-
ing in a unique, easily identifiable siren sound. The siren
chirps can be either full volume or 6 decibels quieter than
the full alarm blast.