DEI 1100d Owner'S Manual Download Page 15

Directed Electronics, Inc. (DEI

®

) promises to

the original purchaser, to replace this
product should it prove to be defective in
workmanship or material under normal use,
for a period of two years from the date of
purchase by the dealer as indicated by the
date code marking of the product

PROVIDED

the product was installed by an

authorized DEI dealer. During this two year
period, there will be no charge for this
replacement 

PROVIDED

the unit is returned

to DEI, shipping pre-paid.  If the unit is
installed by anyone other than an autho-
rized DEI dealer, the warranty period will be
1 year from date of purchase by the dealer
as indicated by the date code marking of
the product. During this 1 year period, there
will be no charge for this replacement

PROVIDED

the unit is returned to DEI, ship-

ping pre-paid. This warranty is non-transfer-
able and does not apply to any unit that has
been modified or used in a manner contrary
to its intended purpose, and does not cover
damage to the unit caused by installation or
removal of the unit. This warranty is void if
the product has been damaged by accident
or unreasonable use, neglect, improper
service or other causes not arising out of
defects in materials or construction. 

ALL

WARRANTIES INCLUDING BUT NOT
LIMITED TO EXPRESS WARRANTY,
IMPLIED WARRANTY, WARRANTY OF
MERCHANTABILITY, FITNESS FOR PARTIC-

ULAR PURPOSE, AND WARRANTY OF
NON-INFRINGEMENT OF INTELLECTUAL
PROPERTY ARE EXPRESSLY EXCLUDED TO
THE MAXIMUM EXTENT ALLOWED BY
LAW, AND DEI NEITHER ASSUMES NOR
AUTHORIZES ANY PERSON TO ASSUME
FOR IT ANY LIABILITY IN CONNECTION
WITH THE SALE OF THE PRODUCT. DEI
HAS ABSOLUTELY NO LIABILITY FOR ANY
AND ALL ACTS OF THIRD PARTIES
INCLUDING ITS AUTHORIZED DEALERS
OR INSTALLERS.

Unit must be returned to

DEI, postage pre-paid, with: consumer’s
name, telephone number, and address,
authorized dealer’s name and address, and
product description.

IN ORDER FOR THIS

WARRANTY TO BE VALID, YOUR UNIT
MUST BE SHIPPED WITH PROOF OF
INSTALLATION BY AN AUTHORIZED DEI
DEALER. ALL UNITS RECEIVED BY DEI FOR
WARRANTY REPAIR WITHOUT PROOF OF
DEI DEALER INSTALLATION WILL BE
COVERED BY THE LIMITED 1 YEAR PARTS
AND LABOR WARRANTY

Note:

This

warranty does not cover labor costs for the
removal and reinstallation of the unit. 

BY

PURCHASING THIS PRODUCT, THE
CONSUMER AGREES AND CONSENTS THAT
ALL DISPUTES BETWEEN THE CONSUMER
AND DEI SHALL BE RESOLVED IN ACCOR-
DANCE WITH CALIFORNIA LAWS IN SAN-
DIEGO COUNTY, CALIFORNIA.

13

© 1999 Directed Electronics, Inc 

LIMITED TWO YEAR CONSUMER WARRANTY

Summary of Contents for 1100d

















Reviews: