16
Connect and seal the process water line/suction line of the pressure booster with the threaded sleeve connection (see 3.3) of
the
Watermanager GWM.
Figure 11: Connection of the process water pipe with integrated submerged booster pump
Figure 12: Connection of the process water pipe with extern booster pump station
Connect the suction line in a de-energised state. No forces must be applied to the threaded sleeve connection of
the system. We recommend installing a shut-off valve and a detachable screw.
We recommend installing a cold water meter in the pressure line.
We recommend to install an expansion vessel in the pressure line after the booster pump station.
Heed the installation manual for the pressure booster pump as well!
5.8.
Process water line
