5
4
© 2020 Dehaco B.V. • User Manual • Floor stripper DTS 170 UK (115V)_2020-04_v2.2_EN
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)88 - 20 20 600 •
[email protected] • www.dehaco.nl
3. Machine overview
1. Introduction | 2. General description
1. INTRODUCTION
Thank you for purchasing the DTS170 Floor stripper.
You are now in the possession of a machine that, if
used correctly, can be used without any malfunctions
for many years to come.
The objective of this user manual is to make you
familiar with the machine’s operation, give instructions
for working safely and provide guidelines for periodic
maintenance.
The manual was drawn up for all persons involved with
the machine’s use, operation and maintenance.
These persons must:
Ø
Have the level of know-how and qualifications
required for their task.
Ø
Have read and understood this user manual.
Ø
Observe all indicated safety instructions.
Ø
Have sufficient, suitable and good quality tools at
their disposal, if necessary.
This user manual, the type plate and the safety stickers
applied to the machine contain important safety
information and as such are an integral part of the
delivery.
Keep this manual in a safe place and pass it on to the
new owner when the machine is sold on.
When this user manual, the type plate or the safety
stickers are damaged, these should be applied or
made available again.
These components can also be provided by your
supplier afterwards.
3. MACHINE OVERVIEW
WARNING!
Make sure you are familiar with the content of this
user manual before you start working with the
machine, so you are able to use all its possibilities
in an optimal and safe way!
At delivery, the DTS170 has been fully assembled
and tested and is ready for use.
The delivery comprises:
Ø
Floor stripper DTS170
Ø
Case with accessories:
§
User manual,
§
Hearing protection, safety goggles,
gloves
§
Strip blades
§
6 and 8 mm socket head wrench
§
Extension cord
Immediately at delivery, check that the machine
is complete and undamaged. In case of missing
components or damage during transport, please
immediately contact your supplier.
2. GENERAL DESCRIPTION
The DTS170 Floor stripper was developed by Dehaco
for optimum use, great capacity and a long life span.
This was achieved by applying available technical
know-how to meet practical requirements.
A simple but constructively high quality Floor
stripper was designed, extensively tested in practice
and taken in production.
An -easily exchangeable- hard steel blade
suspended in vibration rubbers is made to vibrate
by means of a driven eccentric. By inserting this
blade under the carpet, the glue layer is “cut
through” by means of vibration. Depending on the
carpet’s weight and the glue used, the driving speed
can be variably adjusted, so that the maximum
capacity can be achieved for any situation.
In order to be able to turn around quickly, two
freewheels have been mounted that are pressed
on the floor by tilting the stripper, thus enabling the
user to lift the driven wheels from the floor.
Characteristic features:
- Very easy to operate
- Quickly exchangeable hard steel blade Drive
with maintenance free geared motor
- No lubrication points
- Removable extra counter-weight plates
- Low required power (220V – 16A)
- Extra freewheel set for quick turning,
positioning and transporting.
1.
Drive motor.
2.
On/Reset press button.
3.
Plug tiller head.
4.
On/Off strip motor.
5.
Plug power cord.
6.
Clamp screw tiller.
7. Freewheel
8.
Driven wheel.
9.
Crane hook.
10.
Strip motor.
11.
Clamping plate.
12.
Blade holder.
13.
Handle tiller head.
14.
Thumb button for operating drive motor.
15.
Drive speed controller.
16.
Emergency stop button.
17. Tiller.
18.
Half side plate (counter-weight plate).
19.
Whole side plate (counter-weight plate).
20.
Front plate (counter-weight plate).
10
11
12
1
2
3
4
5
6
7
8
13
14
15
16
17
18
19
20