ENGLISH
Maintenance schedule
ANNUAL MAINTENANCE
Major maintenance items that
should be performed by the dealer
Au moins 1X par an
Fork
•
Shock
•
Clean and grease steering head bearings and seals
•
Replace fiberglass in the muffler
•
Treat electric contacts and switches with an aerosol protector
•
Replace the clutch hydraulic fluid
•
Replace the brake fluid
•
Checks and major maintenance to be performed
by the rider
Before
each use
After
each use
Check the engine oil level
•
Check brake fluid level
•
Check status of the brake pads
•
Verify operation of the lights
•
Verify operation of the horn
•
Lubricate throttle cable
•
Regularly purge the air from the fork legs
•
Regularly clean the fork dust seals
•
Clean and lubricate chain, check tension and adjust if necessary
•
Clean air filter and box
•
Check tires and tire pressure
•
Check the coolant level
•
Check fuel lines for leaks
•
Check status of all the controls
•
Check the brakes
•
•
Spray anti-corrosion protector on all non painted parts
(except for the brake parts and the exhaust system)
•
Spray protector on electrical switches
•
Check tightness of nuts, screws and clamps
•
ATTENTION
In competition you have to perform the 20 hour maintenance schedule after each race!
This should not be exceeded by more than 2 hours.
The services performed by the Sherco dealer do not replace routine service and maintenance by the rider!
129
