Page 7
Mix 3 units of hard food and 2 units of water
in order to have a smooth jug blender
experience. (i.e.: 60 gr hard food 40 ml
water)
Caution
x
Do not place or blend hot food or liquids in
jug
A
. If you process soup, make sure that
the liquid temperature does not exceed
40°
C
.
x
Never let the jug blender operate while
empty (without food).
x
Never let the jug blender operate without
jug
A
on the motor housing
C
.
5.
Close jug
A
with the cutter blade
B
.
6.
Place jug
A
onto the motor unit
C
in an
upright position in such a way that the cutter
blade
B
is facing down.
Caution
x
Never move or turn jug
A
after it has been
properly seated in the place.
7.
Connect the power plug to a suitable
power outlet.
8.
Press the required programme button.
Auto Blend
Press Auto Blend
E
. The button light will
illuminate. The product will operate in auto
programme for 60 seconds and then stop
automatically.
Press Auto Blend again or press Start/Stop
button
D
to stop the product during
operation.
Pulse Button
Press and hold “Pulse“
F
to start blending.
The button light will illuminate. Release the
button when the blending process has been
completed.
After running the appliance for 1 minute,
allow for it to cool down before using it again.
Be sure the motor is switched off and has
completely stopped before removing jug
A
from the motor housing
C
.
Ingredients Maximum
quantities
Processing
time
Fruits
100 - 200 g
20 - 30
Seconds
Fruit juice
100-200
g
Fruit + Water
(optional)
20 - 30
Seconds
Milkshake
100 g Fruit +
300 ml Milk
20 - 30
Seconds
Pressing on the Pulse button for
1 to 2 seconds is a “PULSE“.
“PULSE“ is an impact function.
This function helps with better
blending results.
Caution
Never run the blender
continuously for longer than 1
minute in order to prevent
overheating.
Never place any utensil (scraper,
fork, etc.) in jug A while the
blender is operating.
9.
Pull the power plug out of the power
outlet.
10.
Remove jug
A
from the motor housing
C
; to do this, turn jug
A
in an anti-clockwise
direction.
11.
Remove chopping blade
B
by turning it
counter clockwise and attach the jar lid
I
onto
jug
A
.
Maximum quantities and processing time
See table below for maximum
and
processing time.
