Page 6
Operation
2
Preparation
Caution
x
Switch off the appliance and disconnect
from the supply before changing
accessories or handling parts that move in
use.
1.
Remove all packaging and sticker
materials and dispose of them responsibly.
2.
Take the motor housing unit
C
and place
it on a level surface, e.g. on the kitchen
counter.
Caution
x
The blade unit is very sharp! Handle the
blade unit with utmost care, especially
during cleaning, in order to avoid injuries.
3.
Clean all parts, with the exception of the
motor housing
C
as described in “Cleaning
and care”.
4.
After cleaning, re-assemble the jug
blender in the reverse order.
5.
Insert chopping blade
B
unit onto the jug
A
by rotating it clockwise. Note the “lock”
arrow direction at the bottom of the chopping
blade unit
B
.
7.
To release jug
A
, turn it in an anti-
clockwise direction.
Cut food into small pieces before placing in
the appliance
Blending
1.
Place the device on an even and dry
surface. The non-slip feet
G
ensure the
stability of the appliance.
2.
Make sure that the power cord is
disconnected from the power supply.
3.
Remove jug
A
from the motor housing
C
;
to do this, turn jug
A
in an anti-clockwise
direction and lift it upwards; Turn off the
chopping blade
B
, turning it clockwise.
4.
Now put the ingredients to be blended into
jug
A
. Do not overfill.
Note
x
Add water to ensure the jug blender
functions smoothly.
Lock
Unlock
Make sure that the notches on
the bottom of the jug A fit those in
the motor housing C.
6.
Place jug
A
onto the motor housing
C
Lock jug
A
clockwise according to the “lock”
arrow on the motor housing
C
.
