Page 15
Cleaning the filter drawer
•
Any lint and fibres not collected by the lint
filter are captured in the filter drawer
located behind the kick panel.
•
The filters in the drawer, one foam and
one cloth, should be cleaned after every
5 drying cycles.
•
Should you forget, a warning symbol will
appear on the display.
1. Press the kick panel tab to open the kick
plate.
2. Remove the filter drawer cover by turning
it in an anti clockwise direction.
3. Pull the filter drawer out.
4. Open the drawer by pressing on the red
button.
5. Remove the sponge filter. Hand wash the
sponge and dry
6. Remove any lint, and fibres by hand or
using a soft cloth. If necessary open the
pores in the mesh by rinsing under
running water.
7. Dry the filter, replace the sponge
8. Close the filter, ensuring the red button
locks, and place it back in it’s housing.
9. Turn the filter cover clockwise to secure it
in place
10.Close the kick panel cover.
Draining the water tank.
(Continued)
•
Drain the tank & clean lint from funnel.
•
Slide the empty tank back in it’s housing.
Never remove the water tank whilst the
dryer is operating.
Condensed water is not fit for drinking.