Page 7
Mode of operation
The appliance has been designed as either
an air extractor (The air is drawn in and
cleaned by the aluminium filter and directed
outside through an exhaust pipe with 150mm
diameter (not included with the product) or
as an air re-circulator (The air is drawn in
and cleaned by a carbon filter (not included
with the product).
To work as an air extractor; your cooker
hood can be installed as per the below
diagram.
To work as an air re-circulator; your cooker
hood can be installed as per the below
diagram.
Electrical connection
•
The cooker hood uses a 220-230V~ /
50Hz power supply.
•
If the mains power cord is damaged, it
must be replaced by a qualified
electrician.
•
The power cord is located in the chimney
area. Should you require an installation
with no visible wiring, a 15 amp earthed
plug socket should be accessible either in
the ceiling above the cooker hood or on
the wall behind the chimney area. (A
qualified electrician must provide this
facility).
•
The cooker hood must be earthed. The
manufacturer and the seller do not
accept responsibility for any damage
due to incorrect electrical connection.
•
This cooker hood may not be used with
a battery inverter power supply.
Before use
Description
•
The cooker hood fan extracts the kitchen
vapours and passes them through the
filter.
•
The filter absorbs the solid particles in the
cooking vapours, keeping the kitchen
almost free of grease.
Before using your new cooker hood for the
first time, please read this manual carefully.
It contains important information concerning
your personal safety as well as on the use
and care of the cooker hood.
•
Remove all packaging (except any
protective film on the cooker hood if
applicable) and dispose of it in an
environmentally friendly manner.
•
If the cooker hood is damaged in any
way, do not use it. Report the damage to
your dealer, who will take the necessary
corrective action.
Note:
Ensure any protective
coverings have been removed
after installation.
