MAINTENANCE NOTICE
IT-TDFX-222
Revision 0
Page 9/16
October 2008
CHANGING SEALS AND REASSEMBLY
1.7
INTRODUCTION:
Our valve components are listed and referenced in the "Parts catalogue" section
of our folder and our CD-ROM, together with the information necessary for ordering
your spare parts.
1.8
REASSEMBLING THE MANUAL AND AUTOMATIC OPERATING SYSTEM:
This procedure is performed in the reverse order to dismantling. However, it is necessary
to take into account the following comments for the automatic system:
Before reassembling the parts, ensure that the assembly is lubricated with an appropriate
lubricant (water-resistant and temperature-resistant food grade grease).
Example for information: PURE TAC LUBRIPLATE by TOTAL FINA)
NOTE:
For removing and refitting the actuator, refer to its maintenance notice.
Operate the actuator with air before continuing reassembly.
NOTE !
