Definitive Technology C/L/R 2500 Owner'S Manual Download Page 2

2

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of
this device. There are no user serviceable parts inside. Please refer all servicing to licensed service
technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the
user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of
an exclamation point inside a triangle is intended to alert the user to the presence of important
operating, maintenance and servicing information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or mois-
ture.

1. Read Instructions—All safety and operating instructions should be read before operating the device.
2. Retain Instructions—The safety and operating instructions should be retained for future reference.
3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and safety instructions should be followed.
5. Water & Moisture—The device should  never be used in, on or near water for risk of fatal shock.
6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by

the manufacturer.

8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should

never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.

9. Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-gen-

erating devices.

10. Power Supply—The device should only be connected to a power supply of the type described in the oper-

ating instructions or as marked on the device.

11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed

by items placed on them or against them. Special attention should be paid to areas where the plug enters a
socket or fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the

device.

15. Damage Requiring Service—The device should be serviced by licensed technicians when:

• The plug or power supply cord has been damaged.
• Objects have fallen or liquid spilled inside of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a marked change in performance.
• The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians. Only replacement parts speci-

fied by the manufacturer should be used. The use of unauthorized substitutions may result in fire,
shock, or other hazards.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for C/L/R 2500















Reviews: