15
– Install the air outlet grills in a way that the moist air can leave the unit
unhampered
and make
sure the air flow is not directed towards obstacles (pillars, furniture, etc.) or cold outer walls (risk
of condensation).
4.4
Connecting the water supply (PH28A only)
The water supply has to be connected to the unit by a qualified specialist according to the illustra
-
tion below. The installation data has to be maintained. The installation of a shut-off valve next to the
PH28A is mandatory. Lay the connection hose carefully so that nobody will trip over it.
WARNING!
For the water installation the unit must be disconnected from the mains (pull the plug out of the
socket) and secured against inadvertent reconnection.
Important!
The
local regulations
regarding the connection of units to drinking water systems must
be observed.
Drinking water without additives:
– Admissible water pressure: 0.5...6.0 bar
– Admissible water temperature: 5...40 °C
Filter valve (accessory “Z261”)
Water connector G 3/4" (female thread)
