- 16 -
To remove the monitor for service or disposal, unscrew the mounting screw from the
top center of the monitor, and slide the monitor up and off mounting plate.
Insert a small flat-head screwdriver into the slot, lift up the deactivation Stop, and
slide the switch to farthest left end to deactivate the monitor. The switch moves in
one direction only, and cannot be moved back. Once monitor is deactivated, the
sealed lithium batteries will be fully discharged and the monitor will no longer work.
Insert a small flat-head screw
driver into the slot to lift up the
deactivation
STOP
ON
DEACTIVATE
Lift up Stop and
END-OF-LIFE signals
are initiated
S
T
O
P
S
T
O
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
slide to left to
permanently deactivate
CO Monitor when
S
T
O
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
(E) Monitor is activated and “ON” when switch is at
STOP
and mounting hole is open
ON
DEACTIVATE
Lift up Stop and
END-OF-LIFE signals
are initiated
S
T
O
P
S
TO
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
slide to left to
permanently deactivate
CO Monitor when
S
TO
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
Mounting hole is closed when
switch is slid to
.
Deactivate
(F) Monitor is permanently deactivated when switch is moved to left past
STOP
and mounting hole is closed.
