<
< UI0584/1013
> <
ISSUE 01
> <
DA
TE 29.10.13
>
2
Thank you for buying the Defender Light Cannon.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with
many years of trouble-free, safe and reliable service. It is suitable for both indoor and outdoor operation.
IMPORTANT SAFETY INSTRUCTIONS
This instruction booklet contains vital information for the safe use and operation of the Defender Light Cannon. Carefully
read and understand all instructions before use. Failure to adhere to the instructions could result in serious
personal injury or property damage. In addition, you should follow all warnings and instructions affixed to your
Defender Light Cannon.
This product has been carefully designed for its intended purpose and must not be modified in anyway. Any
alteration may compromise safety, as well as invalidate Technical Production Approvals and your insurance.
KEEP THIS BOOKLET FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
1. Do not look directly into the light source
2. Ensure you are aware of all the safety requirements and the Light Cannon is suitable for the task you wish
to undertake
3. It is suitable for both indoor and outdoor operation - ensure the 240V plug (BS1363/A) is connected to a
suitable IP44 socket enclosure if charged outdoors
4. Do not use if any of the components on the light are damaged. If there is any doubt about the condition
do not use
5. Protect power cord from contact with sharp objects, chemicals or hot surfaces
6. Ensure the cable does not present a trip hazard during charging. Do not run cable across walkways
7. Never use this equipment if you are ill, feeling tired, or under the influence of alcohol or drugs
8. Keep equipment dry whenever possible
9. Do not use the near a source of heat
10. The Light Cannon must not be modified in any way. Alterations of any description may invalidate the
product warranty and technical approvals
11. Always ensure that the unit has cooled completely before storing
12. Do not work near flammable gases or liquids
13. If the external flexible cable or cord of the lumniaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard
14. Do not block the vents on the rear of the light head
15. Periodically check the vents to ensure no dirt or debris is blocking these vents
CHARGING PROCEDURE - connection
CAUTION – Lithium batteries can present a hazard
if not handled correctly.
•
Unscrew the dust cover from the charging socket
•
Plug the charging cable into the charging socket and screw to secure
•
Plug the charging cable in to a power supply. Refer to the rating label before
connecting to the power supply
•
Remove charging cable once the Light Cannon is fully charged
•
Replace the dust cover after charging
NB. Unit should be placed on charge within 3 months of purchase. Unit should be charged for a minimum of 16
hours to ensure 8 hours of light. Once charged, the unit should be charged every 3 months if not used regularly.
If used on a regular basis unit should be charged after each use.
