![Defender Car Vision 2020 HD Operation Manual Download Page 7](http://html.mh-extra.com/html/defender/car-vision-2020-hd/car-vision-2020-hd_operation-manual_2463588007.webp)
7
www.defender-global.com
Trifles make perfection
7
defender
! The following configuration sub-menus are available only for photo!
3.
Sideshow: Start / Interval / Repeat
You can configure the slide show
4.
Sound reminder: Add/ Remove.
You can add a sound reminder to the shot photo.
5. Backdrop: Set (to apply this photo as a backdrop) / Cancel.
Upon selection press “OK” button to confirm, the configuration is complete. Then press “MENU” button to exit.
System configuration
Switch the device on.
Press “MODE” button to enter the configuration menu (in video recording mode). Then
press “MODE” button to navigate to the system configuration menu. Shift the cursor by the “UP” and “DOWN”
buttons. To enter the sub-
menu press “OK” button and select the re
quired sub-
menu, then press “OK” button.
1. Sounds.
Flash sound: On / Off.
On sound: select the sound by pressing “MODE” button.
Button sound: On / Off.
Button volume: 0,1,2,3.
2.
Power supply frequency: 50Hz, 60Hz (on default power supply frequency is set to 50Hz).
3.
Energy saving: 1 min, 3 min, 5 min, Off.
Switching the device off if no motion detection within the set time interval.
4. Switching the screen off: 30 seconds, 1 min, 2 min, Off.
Switching the screen off in the set time interval. To switch the screen press any button.
5.
Date and time: month / day / year hour / minute.
6.
Language: English, Chinese (simplified), Chinese (traditional), Spanish, French, Portuguese, German,
Japanese, Russian.
7.
TV output: NTSC / PAL (PAL on default).
8.
Screen backdrop: Off / Standard / My photos (user's backdrop).
9.
Formate the card: Yes / No.
10.
IR highlighting: On/Off
11.
Menu rotation: Yes / No.
While rotating the menu, the recorded image rotates as well!
12.
Configuration reset: Yes / No.
13.
Version: The information on the software is shown.
Press “DOWN / UP” button to select and press “OK” button to confirm. Press “MENU” button to exit the menu
after completing the configuration.
Recording while charging and connection to PC
Connect the switched off device to the computer or car charger. The device will switch on in the video recording
mode or in the mode selection menu. Press “MENU” button to enter themode selection menu or to exit the menu.
To select the mode shift the cursor by the “UP” and “DOWN” buttons. To
activate