INSTALLATION
FEATURES
SAFETY INSTRUCTIONS
Before using the camera, please read this manual carefully and keep it
for future use.
•
Installation should be completed by a qualified installer or experienced
person with good knowledge of network installation.
•
Do not expose the lens to intense light source for long periods.
•
Do not touch the sensor directly.
•
Ensure the power supply used to operate the camera is of the correct
specification.
•
Operating temperature range is -10
o
C to +60
o
C.
•
Do not mount the camera directly above a heat source.
•
Do not install the camera below an air curtain or air conditioning unit or
the lens may be affected by condensation.
•
There are no serviceable parts inside - do not disassemble.
•
It is advisable to install lightning protection if the camera or any wiring is
to be installed in a vulnerable position.
Auto Gain Control (AGC)
•
Built-in auto gain control (AGC) circuit. The colour camera can produce
high quality pictures in low light condition.
Auto Electronic Shutter (AES)
•
Built-in auto electronic shutter function. The colour camera’s AES speed
is up to 1/100,000s.
Control Button
