AHD DVR User Manual
23
Operation: After PPPOE dialing successfully, you can look up the IP address and obtain the current IP address. Then
use this IP address to visit the DVR through user port.
Picture 4.8
4.3.2 NTP Setup
Server IP:
Enter the address of NTP server.
Port:
Default: 123. You can set the port according to NTP server.
Update Period:
Set the check interval about synchronizing system time with NTP server.
Picture 4.9
4.3.3 EMAIL Setup
If the alarm is turned on or the alarm linkage photos are taken, system can send an email about the alarm information
and the photos to the appointed address.
Picture 4.10
Summary of Contents for 82-20460
Page 1: ...AHD DVR User Manual 1 AHD DVR...
Page 49: ...AHD DVR User Manual 49...
