8
SETUP MENU
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
ALARM SETUP
SCHEDULE RECORD
EVENT LIST
HDD MANAGEMENT
DEAFULT SETUP
EXIT
REC 30P 2007/JAN/01 10:20:30 MON
CH1 O O CH2
CH3 O O CH4
231GB/239GB 97% [FULL REC] MUX
3. SETUP PROCEDURES
LIVE VIEWING
STATUS BAR
- Press
▲
button to move from top to bottom, or down a
line. Recording FPS will be displayed on
the left upper corner.
INFORMATION BAR
- Press
▼
button to move from bottom or to move up a
line, or use
◄
or
►
buttons to
change information between HARD DISK STATUS, RECORDING MODE or AUDIO RECORDING STATUS.
Note: Live viewing will resume after two minutes of MENU mode inactivity. If full-time or alarm
recording is set, recording will automatically resume after 5 seconds of inactivity in the MENU viewing
mode.
MAIN SETUP MENU
Press the
MENU
button to access the main menu.
Use the
▲
or
▼
button to select items.
Press the
◄
or
►
button to confirm the selection.
Press
MENU
again to exit the SETUP mode.
3.1
SYSTEM SETUP
System set up.
3.2
CAMERA SETUP
Camera set up.
3.3
RECORD SETUP
Recording set up.
3.4
ALARM SETUP
Alarm set up.
3.5
SCHEDULE RECORD
3.6
EVENT LIST
Recording event list
3.7
HDD MANAGEMENT
Hard disk management
3.8
DEAFULT SETUP
Return to factory setting
3.9
EXIT
Escape from the setup menu
Schedule recording set up
STATUS BAR
INFROMATION BAR
