Defender Security 82-12475, User Manual

Page: 13 / 27

13
EVENT LIST
START TIME: 2007/JAN/01 12:07:06
END TIME: 2007/JAN/05 12:07:30
>01 RECORD 2007/JAN/05 10:07:06
02 MOT CH1 2007/JAN/05 12:06:18
03 MOT CH2 2007/JAN/04 12:05:22
04 POWER 2007/JAN/03 22:04:45
05 RECORD 2007/JAN/03 12:03:00
06 RECORD 2007/JAN/02 05:02:34
07 POWER 2007/JAN/01 12:07:06
HDD MANAGEMENT
OVERWRITE ENABLE YES
HDD FULL WARNING 10%
HDD CAPACITY 76GB
HDD LEFT RATIO 73GB 97%
HDD FORMAT N/A
EXIT
3.6 EVENT LIST
Press ▲ or ▼ key on "EVENT LIST" & ◄ or ► to
enter:
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to confirm the selection.
Press MENU back to SETUP MENU.
Use " ▲ or ▼ "buttons to move to the desired event for playback (note: the location of " > " symbol will move up
and down to indicate the current event selected.
Press " ◄ or ► " button to select the chosen event footage and press ► PLAY to start playback.
3 different types of events are recorded:
1. A “RECORD” event – This event is captured when manual recording is selected using the "REC" button on
the front panel, or if the CONSTANT recording (“O”) selection in the SCHEDULE SETUP menu for
specific periods.
2. A “POWER” event – In the event of a power loss, the system will add record the event as a "POWER
ERROR DETECTED" and will show it on screen during reboot.
3. A “MOT CHx” event – This event is captured when motion detection recording is triggered (note: the
“MOTION EVENT MIGRATION” setting in the RECORD SETUP menu must be turned “ON”) .
3.7 HDD MANAGEMENT
Press ▲ or ▼ key on "HDD MANAGEMENT" & ◄ or ► to enter:
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to confirm the selection.
Press MENU back to SETUP MENU.
A.
OVERWRITE MODE YES (YES/NO)
Use " ◄ or ► " button to enable or disable overwriting when HDD is full. When HDD overwrite is enabled,
the oldest partition on HDD will automatically be reused, and the oldest images will be overwritten with
current images. When overwrite mode is disabled, the HDD Full Warning percentage selection will be
displayed, and manual configuration is necessary to either initiate overwrite, or replace with new HDD.
B.
HDD FULL WARNING 10% (5% / 10% / 15% / 20%)
Use " ◄ or ► " button to select one of the four settings (5% / 10% / 15% / 20%). The default is 10%. A buzzer
will sound a warning signal when the hard drive reaches the specified storage % level.