Page 16
WiFi
Allows connection to your local wireless network or mobile hot spot. Ideal for using your
network’s internet connection for synchronizing stored measurements with PosiSoft.net.
See www.defelsko.com/wifi
Setup Options
Setup WiFi configuration options for the Gage.
AP Channel
The access point channel corresponding to a frequency range. (Default Channel: 6)
For most users the default channel will not have to be altered. If you are experiencing
poor connection or are unable to connect, try another channel.
Press the Up button to highlight the channel. Use the (-) or (+) buttons to change the
channel. Press the Down button and select OK.
Gage Name
Enter a unique name for the Gage (up to 14 Characters). This helps identify the gage on
your local network.
Server Enable
The gage contains a WebServer that can be accessed by network connected devices.
This option enables (default) a connection between the network and the Gage. To
access the gage server, browse to the gages IP Address:8080 using an internet
browser.
IP Settings
Manually enter network IP information as follows...
IP Type (DHCP or Static), IP Address, Gateway, Netmask, DNS1, DNS2
See your network administrator or IT department for assistance.
