13
Returning for Service
Returning for Service
Before returning the
PosiTest LPD
for service –
1. Install new or fully recharged batteries in the proper alignment.
2. Examine all wires, plugs and connectors for damage.
3. Ensure the test sponge is properly moistened.
4. Re-attempt measurement.
If you must return the
PosiTest LPD
for service,
please fill out and include the Service Form located at
www.defelsko.com/support with the detector. Be sure to also include
your company name, company contact, telephone number and fax
number or email address.
Limited Warranty, Sole Remedy
Limited Warranty, Sole Remedy
and Limited Liability
and Limited Liability
DeFelsko's sole warranty, remedy, and liability are the express
limited warranty, remedy, and limited liability that are set forth on its
website: www.defelsko.com/terms.
www.defelsko.com
© DeFelsko Corporation USA 2016 All Rights Reserved
This manual is copyrighted with all rights reserved and may not be
reproduced or transmitted, in whole or part, by any means, without written
permission from DeFelsko Corporation.
DeFelsko and PosiTest are trademarks of DeFelsko Corporation registered
in the U.S. and in other countries. Other brand or product names are
trademarks or registered trademarks of their respective holders.
Every effort has been made to ensure that the information in this manual is
accurate. DeFelsko is not responsible for printing or clerical errors.
IMPORTANT:
Summary of Contents for LPDKITB
Page 1: ...Instruction Manual v 1 0 Low voltage Pinhole Detector LPD ...
Page 15: ...Low voltage Pinhole Detector LPD Manual de Instrucciones v 1 0 ...
Page 29: ...Gebrauchsanweisung v 1 0 Low voltage Pinhole Detector LPD ...
Page 43: ...Notice D Instructions v 1 0 Low voltage Pinhole Detector LPD ...
