PLACING THE MOTION DETECTOR
The Motion Detector is a PIR (passive infrared) detector designed for installation in corners or
on a flat wall surface. When placing the Motion Detector it is important to consider the
following, to ensure that the detector notifies you only when an intruder is detected:
1. Do not place directly over or facing a heat source.
2. Do not place in locations that are exposed to drafts.
3. Do not place outdoors or in locations exposed to direct sunlight.
4. Do not place facing a window surface, or behind blinds or curtains.
For optimal coverage, the Motion Detector should be placed 1.8m - 2.4m above floor level.
See the schematics for horizontal and vertical detection range, at the end of this manual.
TECHNICAL INFORMATION
Product name
DEFA Home Motion Detector
Battery type
2x 1.5V AAA
Battery life
ca. 1,5 years - notifies when battery is low
Radio frequency
868 MHz
Communication range
30m - unobstructed
Operating temperature
-20°C to +40°C
DEFA Home Support
Phone
(+47) 73 90 58 58
www.defa.com
User Manual
