Deer Creek Audio EQ901 Elite, User Manual

Page: 1 / 8

EQ901 Elite User Guide
Introduction 1
1. Features 2
2. What’s Included 2
3. Typical Installation Examples 2
3.1 Tape / Processor Loop Setup 3
3.2 Preamp / Power Amplifier Setup 3
3.3 Active Subwoofer Setup 4
3.4 Dual Stereo Power Amplifier Setup 5
4. Using the EQ901 Elite Remote Control 6
5. Setting Tone Modes 6
6. Analog Input Level 6
7. Support 7
8. Specifications 7
9. Warranty Terms 8
Contact Deer Creek Audio 8
Introduction
The EQ901 Elite is an ultra high performance replacement for existing BOSE 901 Series I/II,
III/IV or V/VI equalizers. The unit provides the BOSE 901 specific equalizer curves with four
tone modes that accommodate a wide range of room conditions and recording variations.
Designed for use with high-quality pre/power amplifiers or integrated amplifiers and receivers,
the unit builds on our EQ901B series with lower distortion, greater dynamic range and higher
fidelity, providing audiophile-grade digital signal processors, DACs and analog signal stages.
Page 1 EQ901 Elite User Guide - Rev. 05242022 deercreekaudio.com