background image

Operator’s Manual

6

LED Multi SeaCam

®

RMA Procedure for Repair

Should it be necessary to return your  camera to the 
factory, follow the procedure for the Flooded Camera 
Repair above, and by leaving the connector partially un-
screwed. For warranty and non-warranty repairs please 
contact DeepSea Power & Light for a RMA number prior 
to returning your item. Please have your light model 
number, serial number and any other pertinent informa-
tion along with a description of the problem, on hand 
when you call, or include them in a fax or e-mail. When 
shipping your item, be sure that the freight is pre-paid 
(CODs will not be accepted) and that the RMA number 
is clearly printed on the outside of the box. All shipments 
should be sent to the address below:

DeepSea Power & Light

Attn: RMA ####

4033 Ruffin Road

San Diego, CA 92123-1817

U.S.A

Tel: (858) 576-1261

Fax: 858-576-0219

e-mail: [email protected]

Warranty Information

Limited Warranty

Seller warrants that the goods (except internal electronic 
components) sold under this contract will be free from 
defect in material and workmanship for a period of one 
year from the date of shipment from the factory, if they 
have been properly used. Internal electronic compo-
nents are warranted for 90 days from the date of ship-
ment from the factory, if they have been properly used. 
This warranty will be limited to the repair or replacement 
of parts and the necessary labor and services required 
to repair the goods. IT IS EXPRESSLY AGREED THAT 
THIS WARRANTY WILL BE IN LIEU OF ALL WARRAN-
TIES OF FITNESS AND IN LIEU OF THE WARRANTY 
OF MERCHANTABILITY. This warranty is the exclusive 
and only warranty to pass with the goods under this 
contract. No agent, employee, or representative of the 
Seller has any authority to bind Seller to any informa-
tion, representation, or warranty concerning the goods 
sold under this contract, and unless an affirmation, 
representation, or warranty made by an agent, employ-
ee, or representative is specifically included within this 
contract, it will not be enforceable by Buyer. If notice of 
defect is given to DeepSea Power & Light, Inc. with-
in such 90 day or one year warranty period, the sole 
obligation of DeepSea Power & Light, Inc. shall be to 
furnish new or repaired parts free of charge in exchange 

for parts which have been proved defective and does 
not include any other costs such as the cost of removal 
of the defective part, installation, labor, or consequen-
tial damages of any kind, the exclusive remedy being 
to require DeepSea Power & Light, Inc. to furnish such 
new parts. Under no circumstances shall the Buyer be 
entitled to recover any incidental damages as that term 
is defined in Commercial Code §2715.

T: 

(858) 576-1261

F: 

(858) 576-0219

www.deepsea.com

[email protected]

Summary of Contents for LED Multi SeaCam







Reviews: