Edition I / May 2012
S. 17
opEratIng InStructIonS DEB1200D anD DLH1200D
14) TECHNICAL DATA (SPECIFICATIONS)
General:
Manufacturer:
DEDOTEC optronische und mechanische Systeme GmbH
Model/Type:
DEB1200D (ballast); DLH1200D (light head)
Lamps:
HMI800W-SE7HR, BA800W-SE/HR, CSR800W-SE
Standards:
EN 55015, EN 61547, EN 61000-3-2 and -3, EN 60598-1,
EN 6598-2-17, EN 60922, EN 60950, CE,
Electrical Safety:
Safety Class 1
Prot.Class:
DEB1200D:
IP 23
DLH1200D:
IP 23
DPOW1200D: IP 67
Weights and Measures:
Dimensions:
DEB1200D: L = 329 mm (12.45“), W = 228 mm (9.0”), H = 230 mm (9.07“)
DLH1200D: L = 292 mm (11.5“), W = 328 mm (12.9”), H = 271 mm (10.7“)
DPOW1200D: L = 7 m (23’)
Weight:
DEB1200D:
10 kg (22 lb)
DLH1200D:
10,5 kg (23.2 lb)
DPOW1200D: 1,2 kg (2.5 lb)
Mains connection:
Input power:
1200 VA (max.)
Input voltage:
115 V - 240 V AC
Functional range:
90 V - 264 V AC
Over voltage cut-off integrated to mains switch cut out
above 265 V AC
Current consumption: 5,0 A (U = 240 V AC); 12,0 A (U = 100 V AC)
at maximum lamp power (1200 W)
Mains frequency:
50 cycle / 60 cycle (47 - 65 cycle)
Power factor:
With active power factor correction stabilized to cos
0.98
Efficiency:
Typically 0.90 (depending on lamp and mains voltage)
Operational
temperature:
5° C to 35 ° C (41° F to 95° F),
max. 30° C (86°F) at U = 90 -105 V AC
Storage temperature: -20° C to 80° C ( -4 ° F to 176 ° F )
Light head:
Lamp power:
Position 1: Dimming (450 - 1200 W)
Position 2: Normal (800 W) +/- 5%
Position 3: Boost
(1200 W) +/- 5%
Current:
Square wave current approximately 75 cycle (flickerfree mode)
Regulatory principle: Power regulation with analog multiplier for lamp voltage
range between 60 V to 120 V.
In-rush and short circuit current limited to approximately 15 A.
Ignition:
Hot and cold start
Flicker factor:
< 2%
UV-radiation
max. 3
µ
W/lm
防护
12.5mm
直径和更大的外来物体，防护以
60 º
角从垂直线两侧溅出的水不应引起
损害。
防护灰尘吸入（整体防止接触，防护灰尘渗透）；防护短暂浸泡（防浸）。
