Deditec USB-OPTOIN-8 Hardware Description Download Page 9

Page: 9 / 99

Hardware description | Seite

2. Hardware description

2.1. Quick installation

2.1.1. Step 1 - Installation of the software and driver

Now install the driver DELIB library with the file "delib_install.exe" from the supplied
DEDITEC-Driver CD.

These can be found in the "\zip\DELIB\delib_install.exe" on the DEDITEC-Driver
CD.

Note: On our website

www.deditec.de

you can always find the latest DELIB driver

version.

2.1.2. Step 2 - Connecting of the module

Connect your PC via USB cable to the USB connector of the module.

After about 20 seconds, the module is detected by the driver and can now be
tested and operated.

2.1.3. Step 3 - Testing the connection and the module

In the Start menu, see "Start -> All Programs -> DEDITEC -> DELIB -> Sample
Programs" you will find some example programs to test your module.

Summary of Contents for USB-OPTOIN-8




































































































Search results

Summary of Contents for USB-OPTOIN-8

Reviews:

Related manuals for USB-OPTOIN-8

Brands by name

Popular brands

Deditec USB-OPTOIN-8, Hardware Description

Search results

Summary of Contents for USB-OPTOIN-8

Reviews:

Related manuals for USB-OPTOIN-8

Brands by name

Popular brands